Most pool remodels we quote in New Braunfels and the Hill Country run $8,000 to $60,000. A resurface alone sits at the low end: $8,000 to $12,000 in standard plaster or $12,000 to $20,000 in PebbleTec. A full remodel with new tile, coping, decking and added features usually lands between $25,000 and $60,000, and complete rebuilds go beyond that. Below is what each scope costs and what moves the number.
Pool remodel cost by scope
These are the ranges most of our remodel work in New Braunfels, Boerne, Canyon Lake and San Antonio falls into. Every project is still quoted line by line after we see the pool.
| Scope | Typical 2026 cost |
|---|---|
| Standard replaster | $8,000–$12,000 |
| PebbleTec resurface | $12,000–$20,000 |
| Re-set loose coping | $800–$3,000 |
| Full coping replacement | $5,000–$14,000 |
| Crack repair (localized) | $1,500–$8,000 |
| Structural repair + new interior | $8,000–$30,000+ |
| Single water feature | $3,000–$10,000 |
| Add a raised spa | $15,000–$30,000 |
| Pool deck remodel | $18,000–$55,000 |
| Full remodel (finish, tile, coping, deck, features) | $25,000–$60,000+ |
What changes the price of a pool remodel?
- Interior surface area. A larger pool takes more finish material, more tile and more labor. It is the single biggest driver of a resurface budget.
- A full chip-out. Every replaster we quote includes removing the old plaster down to the sound gunite shell. It costs more labor than coating over the old surface, but the new finish bonds to structure instead of inheriting the old layer’s hollow spots and cracks.
- Finish choice. Standard plaster, PebbleTec, glass tile, travertine and porcelain pavers each sit at a different price point. Compare the two most common finishes in our PebbleTec vs. plaster guide.
- What turns up once the pool is drained. Cracks have to be repaired before a new finish goes on, and a bond beam often needs work once old coping comes off. A new finish over an unrepaired structural crack will telegraph through and fail.
- Scope beyond the interior. New tile, coping, decking and equipment move a resurface into a full remodel. Adding a spa or water features moves it higher again.
- Deck base and drainage. Decking runs $12 to $20 per square foot in concrete, $20 to $32 in pavers and $28 to $45 in travertine, before demolition and drainage work.
Why bundle the work while the pool is drained?
Draining, prep and startup happen once whether you resurface alone or replace tile and coping at the same time. With the pool empty and the plumbing open, it is also the cheapest moment to add a spa or water feature, convert to saltwater, or upgrade to variable-speed equipment and automation. Resurfacing a spa together with the pool saves a second mobilization and gives you a matched finish.
How long does a pool remodel take?
A straightforward resurface and retile usually takes two to four weeks. A resurface with new waterline tile is about two to three weeks from drain to refill, followed by a 28-day startup period of brushing and water balancing while the new finish cures. Coping replacement on a typical residential perimeter adds about one to two weeks. Remodels that add features, equipment or decking take longer, and you get a written schedule before work starts.
Should you remodel or rebuild?
If the shell is structurally sound, a remodel is the faster and less expensive route to a pool you want to use again. A full remodel typically runs $25,000 to $60,000, while new custom gunite pools start around $60,000. We assess the structure first and tell you plainly whether a resurface, a larger remodel or structural repair makes sense. In the rare case a pool is beyond saving, we will tell you that too. See what a new build costs in our custom pool cost guide.
How do homeowners pay for a remodel?
Many spread it out. We work with pool financing partners Lyon Financial and Viking Capital, and you can pre-qualify with a soft credit check that does not affect your score. See our financing page or the guide to pool financing options in Texas.
Frequently asked questions
How much does it cost to remodel a pool in New Braunfels?
Most pool remodels we quote in New Braunfels and the Hill Country run $8,000 to $60,000. A resurface alone sits at the low end. A full remodel with new tile, coping, decking and added features usually lands between $25,000 and $60,000, and complete rebuilds go beyond $60,000.
How much does it cost to resurface a pool?
A standard replaster generally runs $8,000 to $12,000, and a PebbleTec resurface $12,000 to $20,000, depending on interior surface area, the finish selected and how much substrate repair the shell needs.
How long does a pool remodel take?
A straightforward resurface and retile usually takes two to four weeks. A resurface with new waterline tile is about two to three weeks from drain to refill, followed by a 28-day startup period while the finish cures. Remodels that add features, equipment or decking take longer.
Is it cheaper to remodel a pool or build a new one?
Remodeling a structurally sound pool is almost always less than building new. Full remodels typically run $25,000 to $60,000, while new custom gunite pools start around $60,000. We assess the shell first and tell you which makes sense.
Can I add a spa during a pool remodel?
Yes. A remodel is the best time to add one, because the equipment and plumbing are already open. A raised, integrated spa with spillways, tile, lighting and automation typically runs $15,000 to $30,000.
Want a line-item remodel quote?
Text a few photos of your pool to (830) 358-2499 or request a visit. We will scope the remodel and quote it line by line.