Pools made for Wimberley living.
Wimberley is some of the most beautiful land in Texas, and we build pools worthy of it. From Woodcreek to the cypress-lined banks of the Blanco and Cypress Creek, we design custom retreats for steep, cedar-covered lots with views in every direction.
We build throughout the Hill Country, so we know Wimberley's limestone grades and aerobic-septic lots. Every pool is engineered to its slope and finished in durable PebbleTec — a negative edge or natural-look design that disappears into the landscape.
Every Wimberley pool we build is engineered to its exact lot and finished in durable PebbleTec, then backed by smart automation and equipment from trusted partners like Pentair and Jandy. The result is a resort-quality retreat designed for how Texas families actually live outdoors — and built to last through decades of seasons.
Built by two brothers and career firefighters, J. Oliver Pools brings the same integrity and attention to detail to every Wimberley project. Most custom gunite pools we build start around $60,000, with mid‑range builds between $75,000 and $150,000 depending on size, finishes, and features.
Custom pools across Wimberley & Hays County.
Wimberley is dramatic Hill Country — steep wooded hillsides, limestone canyons, and lots along Cypress Creek and the Blanco River. We design and build custom gunite pools throughout Hays County and the communities below.
Woodcreek
A established golf community with rolling, wooded lots and an active POA. We design view-oriented pools and manage approvals.
Cypress Creek
Lots near the creek and swimming holes. We plan grading and drainage for lasting pools close to the water.
Blanco River Corridor
River-adjacent lots that demand careful floodplain and drainage design. We build pools that respect the water and the view.
Rancho del Lago
Acreage with long Hill Country views. Negative edges and resort decks make the most of the grade.
Downtown & Square
Mature, tree-shaded lots near the village. We work around heritage trees and tighter access.
Wimberley Acreage
Steep, wooded ranchettes where we engineer dramatic multi-level pools and grottos.
Built for Steep, Wooded Lots
Wimberley's hillsides are made for negative-edge pools and elevated spas. We engineer retaining and drainage so a dramatic lot becomes a dramatic backyard.
Aerobic Septic & Hays County
Hill Country lots here run on aerobic septic with specific setbacks. We design around them and manage all Hays County permitting.
Designed to Disappear
We favor natural stone, dark finishes, and infinity edges that blend the pool into Wimberley's views rather than interrupt them.
New Pool Construction
Custom gunite pools — free-form, geometric, infinity, and perimeter-overflow.
Learn more →Spas & Water Features
Raised spas, sheer descents, scuppers, and grottos with slides.
Learn more →Outdoor Living
Decking, pergolas, fire, and kitchens that extend the home outdoors.
Learn more →Renovation
Resurfacing, retiling, and full PebbleTec reimaginings of older pools.
Learn more →What it takes to build here — and why local knowledge matters.
Building a swimming pool in Wimberley isn't the same as building one on flat, sandy ground. Get the engineering wrong and a pool can shift, crack, or settle; get it right — as we do on every build — and you have a structure that holds true for decades. Here is an honest look at what goes into a custom pool in our area, and why hiring a local builder protects your investment.
Limestone & steep grade
Wimberley lots are often steep and rocky over limestone. We engineer retaining walls, raised beams, and drainage so a dramatic slope becomes a stunning, structurally sound pool.
Built for hillside lots
Wooded hillsides are made for negative-edge pools and elevated spas. We work with the grade and the trees to create a retreat that floats over the canyon.
Permits, HOA & engineering
We manage Hays County and the Village of Wimberley permits, stamped structural engineering, and HOA architectural approvals for communities like Woodcreek and the Cypress Creek communities. You never chase paperwork — it is part of the build.
Texas heat, sun & water
Long, hot summers shape smart design: efficient variable-speed pumps, optional heaters and chillers, generous shade and shelf seating, and PebbleTec finishes that hold up to UV and hard water year-round.
Transparent pricing, no surprises.
Every backyard is different, so every quote is built from your site, your design, and the features you want — never a templated number. As a guide, here is what custom gunite pool projects typically run in the Wimberley market. For a deeper breakdown, read our 2026 custom pool cost guide, or explore pool financing options.
A true custom gunite pool with a clean geometric or freeform shape, PebbleTec finish, and essential equipment — engineered for your Wimberley lot, not a stock template.
The most popular range in Wimberley: a larger pool with a raised spa, water features, tanning ledge, LED lighting, and smart automation.
A complete backyard resort — infinity edges, grottos, expansive decking, outdoor kitchens, fire features, and full outdoor-living architecture.
Figures are typical ranges for the Wimberley area and include design, engineering, permitting, and PebbleTec finish. Final pricing depends on size, depth, access, soil, and selected features. We provide a clear, line-item proposal before any work begins.
From first sketch to first swim.
A Wimberley pool typically takes eight to fourteen weeks of construction once permits and approvals are in hand, depending on size, weather, and features. Here is the path your project follows. See our full week-by-week pool build timeline.
Design & 3D rendering
We meet at your home, study the lot, and translate your vision into a photorealistic 3D design so you can see and refine your pool before a shovel touches the ground.
Engineering & permits
We finalize structural engineering, pull Hays County and the Village of Wimberley permits, and secure HOA approval — all handled by our team.
Excavation & gunite shell
We dig, set steel, run plumbing and electrical, and pneumatically place the gunite shell that gives your pool its permanent strength.
Tile, decking & features
Waterline tile, coping, decking, and water features go in, followed by your outdoor-living elements — kitchens, pergolas, and fire.
PebbleTec finish & startup
We apply your PebbleTec interior, fill the pool, balance the water, commission the automation, and walk you through ownership. Then you swim.
5.0 stars, and counting.
Rated 5.0 on Google · Google Guaranteed · BBB accredited
From start to finish it was a pleasure working with J. Oliver — informative, responsive, with top-notch workmanship from every subcontractor.
Josh and Shan went above and beyond to bring my dream pool to life. This is my third pool, and by far the best experience I've had.
An easy, hassle-free build from start to finish — very knowledgeable, and they customized the pool just perfectly.
Building a pool here, answered.
Do you provide a custom 3D pool design?+
Yes. Before construction begins we create a photorealistic 3D rendering of your pool and outdoor space, so you can walk through the design, adjust shapes and features, and see exactly how it will sit in your Wimberley backyard. Nothing is left to the imagination.
What makes J. Oliver Pools different?+
We are a firefighter-owned, family-operated builder that treats your project with the same accountability we bring to the firehouse. You get one dedicated local team, transparent line-item pricing, PebbleTec Elite craftsmanship, and clear communication from the first design meeting through your first swim.
How much does a custom pool cost in Wimberley?+
Most custom gunite pools in Wimberley start around $60,000, with the most popular signature builds running $75,000–$150,000 once you add a spa, water features, lighting, and automation. Full estate backyards run higher. We provide a transparent, line-item proposal — and we offer pool financing to fit a range of budgets.
How long does it take to build a pool in Wimberley?+
After permitting and HOA approval, construction typically takes eight to fourteen weeks depending on size, features, weather, and site access. Our project manager keeps you updated at every milestone, from excavation to your PebbleTec finish and first swim.
What kind of pools do you build?+
We build fully custom gunite pools — freeform, geometric, infinity-edge, and perimeter-overflow — along with raised spas, tanning ledges, grottos, and water features. We also design complete outdoor-living spaces with decking, pergolas, kitchens, and fire features.
Are you licensed, insured, and reviewed?+
Yes. J. Oliver Pools is a firefighter-owned, family-operated company that is Google Guaranteed, BBB accredited, a PebbleTec Elite builder, and rated 5.0 stars on Google. You are working with a credentialed local team, not an out-of-town crew.
Do you offer pool financing?+
Yes. We work with financing partners to offer flexible options so you can spread the cost of your Wimberley pool over time. Visit our financing page or ask during your design consultation.
Can you build a pool on a steep Wimberley lot?+
Yes — steep, wooded lots are some of our favorite projects. We handle the engineering, retaining walls, and drainage to build safely on Wimberley's grades.
Do you handle aerobic septic setbacks?+
We do. We design the pool and equipment around your aerobic system and setbacks, and manage Hays County permitting throughout.
Can you build close to the Blanco River or Cypress Creek?+
We can, with proper drainage and engineering for low-lying and floodplain-adjacent lots — both of which we plan for up front.
Guides for Wimberley pool owners.
Let's build yours in
Wimberley.
A first conversation costs nothing. Call your local Wimberley pool builder today.