Pools made for Canyon Lake living.
Canyon Lake is right in our backyard. We build across Canyon Lake Hills, Startzville, Sattler, and the hillside lots that look out over the water — pools shaped by Hill Country limestone, big elevation changes, and long Texas summers on the lake.
Because we're based right here in Comal County, we know how to build on a grade. Every pool is engineered to its exact slope and finished in durable PebbleTec — an infinity edge or raised spa that frames the view instead of fighting it.
Every Canyon Lake pool we build is engineered to its exact lot and finished in durable PebbleTec, then backed by smart automation and equipment from trusted partners like Pentair and Jandy. The result is a resort-quality retreat designed for how Texas families actually live outdoors — and built to last through decades of seasons.
Built by two brothers and career firefighters, J. Oliver Pools brings the same integrity and attention to detail to every Canyon Lake project. Most custom gunite pools we build start around $60,000, with mid‑range builds between $75,000 and $150,000 depending on size, finishes, and features.
Custom pools across Canyon Lake & Comal County.
Canyon Lake's backyards climb the hills around the lake and the Guadalupe River, from gated waterfront communities to wooded acreage with long water views. We design and build custom gunite pools throughout Comal County and the communities below.
Mystic Shores
A large gated community above the lake with an active POA. We design view-oriented pools and manage the full architectural-approval process.
Canyon Lake Forest
Wooded lots a short drive from the water. Freeform pools, grottos, and shaded lounging suit the setting.
The Peninsula & Cordova
Waterfront and near-water lots with dramatic grade. Infinity edges and multi-level decks make the most of the slope.
Startzville & FM 2673
Established lake-community neighborhoods. Family-friendly pools with tanning ledges and spas are popular here.
Hancock & Sattler
Hill Country acreage near the dam and river. Big lots invite generous pools and full outdoor kitchens.
Guadalupe Riverfront
River-adjacent lots that demand careful grading and drainage. We build pools that respect the floodplain and the view.
Built for Steep Lakeside Lots
Canyon Lake's hillside grades are perfect for negative-edge and perimeter-overflow pools — but they demand real retaining walls and drainage. We engineer every structure to its slope.
Permits & Comal County, Handled
From Comal County permits and septic setbacks to lakeside HOA approvals, we manage the paperwork so your build never stalls.
Designed Around the View
We orient each pool to the water and the sunset, so your backyard works with Canyon Lake instead of turning its back on it.
New Pool Construction
Custom gunite pools — free-form, geometric, infinity, and perimeter-overflow.
Learn more →Spas & Water Features
Raised spas, sheer descents, scuppers, and grottos with slides.
Learn more →Outdoor Living
Decking, pergolas, fire, and kitchens that extend the home outdoors.
Learn more →Renovation
Resurfacing, retiling, and full PebbleTec reimaginings of older pools.
Learn more →What it takes to build here — and why local knowledge matters.
Building a swimming pool in Canyon Lake isn't the same as building one on flat, sandy ground. Get the engineering wrong and a pool can shift, crack, or settle; get it right — as we do on every build — and you have a structure that holds true for decades. Here is an honest look at what goes into a custom pool in our area, and why hiring a local builder protects your investment.
Limestone & hillside lots
Lots around Canyon Lake sit on limestone and rocky soil, often on a slope. We assess each site, plan rock excavation, and engineer the shell to anchor securely into Hill Country rock.
Built for the view
Lake and canyon vistas deserve negative edges and elevated spas. We orient and engineer each pool — with retaining and drainage — so the water meets the horizon.
Permits, HOA & engineering
We manage Comal County permits, stamped structural engineering, and HOA architectural approvals for communities like Mystic Shores, Canyon Lake Forest, and The Peninsula POAs. You never chase paperwork — it is part of the build.
Texas heat, sun & water
Long, hot summers shape smart design: efficient variable-speed pumps, optional heaters and chillers, generous shade and shelf seating, and PebbleTec finishes that hold up to UV and hard water year-round.
Transparent pricing, no surprises.
Every backyard is different, so every quote is built from your site, your design, and the features you want — never a templated number. As a guide, here is what custom gunite pool projects typically run in the Canyon Lake market. For a deeper breakdown, read our 2026 custom pool cost guide, or explore pool financing options.
A true custom gunite pool with a clean geometric or freeform shape, PebbleTec finish, and essential equipment — engineered for your Canyon Lake lot, not a stock template.
The most popular range in Canyon Lake: a larger pool with a raised spa, water features, tanning ledge, LED lighting, and smart automation.
A complete backyard resort — infinity edges, grottos, expansive decking, outdoor kitchens, fire features, and full outdoor-living architecture.
Figures are typical ranges for the Canyon Lake area and include design, engineering, permitting, and PebbleTec finish. Final pricing depends on size, depth, access, soil, and selected features. We provide a clear, line-item proposal before any work begins.
From first sketch to first swim.
A Canyon Lake pool typically takes eight to fourteen weeks of construction once permits and approvals are in hand, depending on size, weather, and features. Here is the path your project follows. See our full week-by-week pool build timeline.
Design & 3D rendering
We meet at your home, study the lot, and translate your vision into a photorealistic 3D design so you can see and refine your pool before a shovel touches the ground.
Engineering & permits
We finalize structural engineering, pull Comal County permits, and secure HOA approval — all handled by our team.
Excavation & gunite shell
We dig, set steel, run plumbing and electrical, and pneumatically place the gunite shell that gives your pool its permanent strength.
Tile, decking & features
Waterline tile, coping, decking, and water features go in, followed by your outdoor-living elements — kitchens, pergolas, and fire.
PebbleTec finish & startup
We apply your PebbleTec interior, fill the pool, balance the water, commission the automation, and walk you through ownership. Then you swim.
5.0 stars, and counting.
Rated 5.0 on Google · Google Guaranteed · BBB accredited
From start to finish it was a pleasure working with J. Oliver — informative, responsive, with top-notch workmanship from every subcontractor.
Josh and Shan went above and beyond to bring my dream pool to life. This is my third pool, and by far the best experience I've had.
An easy, hassle-free build from start to finish — very knowledgeable, and they customized the pool just perfectly.
Building a pool here, answered.
Do you provide a custom 3D pool design?+
Yes. Before construction begins we create a photorealistic 3D rendering of your pool and outdoor space, so you can walk through the design, adjust shapes and features, and see exactly how it will sit in your Canyon Lake backyard. Nothing is left to the imagination.
What makes J. Oliver Pools different?+
We are a firefighter-owned, family-operated builder that treats your project with the same accountability we bring to the firehouse. You get one dedicated local team, transparent line-item pricing, PebbleTec Elite craftsmanship, and clear communication from the first design meeting through your first swim.
How much does a custom pool cost in Canyon Lake?+
Most custom gunite pools in Canyon Lake start around $60,000, with the most popular signature builds running $75,000–$150,000 once you add a spa, water features, lighting, and automation. Full estate backyards run higher. We provide a transparent, line-item proposal — and we offer pool financing to fit a range of budgets.
How long does it take to build a pool in Canyon Lake?+
After permitting and HOA approval, construction typically takes eight to fourteen weeks depending on size, features, weather, and site access. Our project manager keeps you updated at every milestone, from excavation to your PebbleTec finish and first swim.
What kind of pools do you build?+
We build fully custom gunite pools — freeform, geometric, infinity-edge, and perimeter-overflow — along with raised spas, tanning ledges, grottos, and water features. We also design complete outdoor-living spaces with decking, pergolas, kitchens, and fire features.
Are you licensed, insured, and reviewed?+
Yes. J. Oliver Pools is a firefighter-owned, family-operated company that is Google Guaranteed, BBB accredited, a PebbleTec Elite builder, and rated 5.0 stars on Google. You are working with a credentialed local team, not an out-of-town crew.
Do you offer pool financing?+
Yes. We work with financing partners to offer flexible options so you can spread the cost of your Canyon Lake pool over time. Visit our financing page or ask during your design consultation.
Can you build an infinity-edge pool on a Canyon Lake slope?+
Yes — sloping lakeside lots are ideal for negative-edge and perimeter-overflow designs. We handle the engineering, retaining walls, and drainage needed to build safely on Canyon Lake's grades.
Do you handle Comal County permits near the lake?+
We do. We manage Comal County permitting, soil studies, septic setbacks, and any lakeside HOA approvals as part of the build.
How does the limestone terrain affect my pool?+
Canyon Lake sits on limestone and clay. Rock can require extra excavation, but it also makes a stable base. We assess your site up front so there are no surprises.
Guides for Canyon Lake pool owners.
Let's build yours in
Canyon Lake.
A first conversation costs nothing. Call your local Canyon Lake pool builder today.